{"id":3143,"date":"2019-06-05T19:02:09","date_gmt":"2019-06-05T19:02:09","guid":{"rendered":"https:\/\/audioordeal.co.uk\/?p=3143"},"modified":"2019-06-05T19:02:25","modified_gmt":"2019-06-05T19:02:25","slug":"5-tips-for-layering-sounds","status":"publish","type":"post","link":"https:\/\/audioordeal.co.uk\/5-tips-for-layering-sounds\/","title":{"rendered":"Top 5 layering tips for electronic music sound designers"},"content":{"rendered":"
\"\"<\/figure>

If you want to know how to layer synths and sounds for better sound design, you are in the right place. <\/p>

Layering is the process of combining sounds together to make more complex results. <\/p>

It is one of the best tools in a producer’s kit, because it is able to overcome the limitations of a synth or sample, by opening it up to extra sounds.<\/p>

Layering can be done with several synths playing together, by editing together samples, or by combining synthesis and sampling. <\/p>

I tend to layer with three parts, not as any rule, just because it happens to generally work well for me. <\/p>

As such, the examples in this article all have three layers, but don’t feel like you need three, you can do just two, or many more. <\/p>

The only thing to be aware of is that layers still need to be mixed together and can cause more problems than they solve.<\/p>

Left, Centre, Right<\/h2>

One of the best reasons for layering is to add extra stereo width. <\/p>

If you have a sound and want some extra width to it, try making three copies and panning them hard left, centre, and hard right. <\/p>

\"\"
You can see here that the synths are hard panned left, centre, and right. They are also grouped together for processing as a single unit.<\/figcaption><\/figure><\/div>

On the left and right channels tweak a few parameters so that the sound is slightly different. <\/p>

Try adjusting the LFO rates slightly, and making small adjustments to the envelope attacks so they are spread in timing too. <\/p>

This will sound like it was recorded in several takes and will stop phasing issues. <\/p>

This effect won’t work well if the sound is identical in each layer, but also, if it is vastly different in each ear, it can be disorientating. <\/p>

\"\"
Stacking oscillators in a synth is a form of layering. Look at this patch in Serum, notice how I have made two slightly different waveshapes, set their phase to random, and hard panned them left and right. The volume of Osc 1 is controlled by an envelope, and Osc 2’s volume is on the default amp envelope.<\/figcaption><\/figure>

Make sure that you don’t add any stereo send effects to the hard-panned tracks (unless you intend to), as this can ruin the stereo feel. <\/p>

It is better to add effects such as ping-pong delay and reverb to the group so that it is processed as a whole. <\/p>

I find wavetable synths especially fun to layer as the range of complex sounds in a single layer is already insane!<\/p>

It is especially easy in Ableton after the latest update, which allows users to upload their own tables in Wavetable<\/a>.<\/p>

Bottom, Middle, Top<\/h2>

This is perhaps the easiest type of layering and is used in a lot of electronic music for the kick drums. <\/p>

If you want to design a sound, you want a good spread across the frequencies. <\/p>

Many producers will layer three different kick drums to get the exact sound they want. <\/p>

\"\"
There are three samples in here, the top two are kicks while the bottom one is a bass note taken from a bass loop. By adding these together and playing with the fades, we can create a really powerful kick sound that is greater than the sum of its parts.<\/figcaption><\/figure>

The kicks are heavily filtered one has only the lowest frequencies, on will have only the punch, and the last one will have the high-end “click”. <\/p>

It can also be done on synths, with many synths offering a built in version. <\/p>

If you have ever enabled a sub oscillator on a synth, you are adding another layer. <\/p>

Likewise, if you copy your melody into a sub-line, then you are technically layering. <\/p>

By adding layers based on frequency, you get a wide spread and the frequencies don’t clash. as much. <\/p>

\"\"<\/figure>

Try choosing a synth patch and adding a layer an octave below, and a layer an octave above. <\/p>

Tweak the two layers so they sound better in their respective octaves and hear how much bigger it sounds. <\/p>

If you are mixing these layers together, make sure you cut some of the low end out of the top octave layer, and cut some of the high end out of the bottom octave’s layer.<\/p>

These can be grouped together and glued together with compression<\/a>.<\/p>

Make sure you are monitoring this at a good volume as factors such as the Fletcher-Munson curve <\/a>really can come into play with this type of sound design.<\/p>

Intro, Verse, Chorus<\/h2>

Here, we have an arrangement approach.<\/p>

As the song progresses, you want the parts to get louder and more intense. <\/p>

This can be done in several ways, such as, adjusting the filters, automating the volume, or adding distortion. <\/p>

If we play with layers though, it can get even more intricate. <\/p>

\"\"
As you can see here, the layers are only being introduced as the song progresses. This is where the line becomes a bit unclear and layering ends up going hand in hand with arrangement. <\/figcaption><\/figure>

Firstly, build up a three layer sound that works great in your chorus. <\/p>

If you take out the bassiest part, you are left with two layers. <\/p>

These two layers are not as exciting as the chorus because they lack the low-end weight. <\/p>

Then for the intro, take out the second most interesting layer, so you are just left with a thinner sound, which by the time the chorus arrives, has already become familiar in our heads.<\/p>

If you are using layered synths which are separate to the bass, try removing the brightest layers for the verse and intros so that when the chorus kicks in, we introduce the layer which adds the most shimmer. <\/p>

Melody, Harmony, Sub<\/h2>

This is very similar to our “Bottom, Middle, Top” approach, but it is more musically interesting. <\/p>

Try choosing two different synth presets and play melody on the beefier preset. <\/p>

On the other preset, pitch it up 7 semitones (a perfect fifth). <\/p>

This perfect fifth layer turns the sound into a “power chord”, but across two different synth sounds. <\/p>

\n